TP-Link TD-W8951NB TD-W8951NB V4 QIG 7106503703 - Page 1

Installation Note The product model shown in this QIG is TD-W8951ND, as an example. Note Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the Port labeled "1~4" on the Router with an Ethernet cable. Connect the splitter to the wall jack using a telephone line, then use the other telephone line to connect to the ADSL port on the Router and the MODEM port of the splitter, also have the PHONE port of the splitter connected to a telephone. Note If no telephone is needed, please connect the ADSL port of the Router to the wall jack using the telephone line directly. 1