TP-Link TD-W9970 TD-W9970 V1 User Guide - Page 31
TD-W9970, Enable IPv4, IP Address, Subnet Mask, Gateway, DNS Server/ Secondary DNS Server - manual
View all TP-Link TD-W9970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TD-W9970 300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide Figure 4-5 WAN Service Setup: Enable IPv4:Check the box to enable IPv4. IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask: Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Gateway (Optional): Enter the gateway IP address in dotted-decimal notation provided by your ISP. DNS Server/ Secondary DNS Server: Here you can set DNS Server (at least one) manually. The Route will use this DNS Server for priority. Default Gateway: Select a WAN Interface from the drop-down list as the IPv4 default gateway. Enable IPv6: Check the box to enable IPv6. 20
TD-W9970
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
20
Figure 4-5
WAN Service Setup:
Enable IPv4
:
Check the box to enable IPv4.
IP Address:
Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask:
Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
Gateway
(Optional): Enter the gateway IP address in dotted-decimal notation provided by
your ISP.
DNS Server/ Secondary DNS Server:
Here you can set DNS Server (at least one) manually.
The Route will use this DNS Server for priority.
Default Gateway:
Select a WAN Interface from the drop-down list as the IPv4 default
gateway.
Enable IPv6:
Check the box to enable IPv6.