TP-Link TD-W9970 TD-W9970 V1 User Guide - Page 71

Add device, III. Enter the modem router's PIN on your client device - lights

Get TP-Link TD-W9970 PDF manuals and user guides View all TP-Link TD-W9970 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

TD-W9970 300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide Figure 4-44 Step 2: Press and hold the WPS button of the client device directly. Step 3: The WPS LED flashes for two minutes during the WPS process. Step 4: When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions. II. Enter the client device's PIN on the modem router Use this method if your client device has a WPS PIN number. Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-43, then the following screen will appear. Figure 4-45 Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: "Connect successfully" will appear on the screen of Figure 4-45, which means the client device has successfully connected to the modem router. III. Enter the modem router's PIN on your client device Use this method if your client device asks for the modem router's PIN number. Step 1: Step 2: Step 3: Step 4: On the client device, enter the PIN number listed on the modem router's WPS screen. (It is also labeled on the bottom of the modem router.) The WPS LED flashes for two minutes during the WPS process. When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions.  Note: 1) The WPS LED on the modem router will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be configured if the Wireless Function of the modem router is 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
TD-W9970
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
60
Figure 4-44
Step 2:
Press and hold the WPS button of the client device directly.
Step 3:
The WPS LED flashes for two minutes during the WPS process.
Step 4:
When the WPS LED is on, the client device has successfully connected to the modem
router.
Refer back to your client device or its documentation for further instructions.
II.
Enter the client device’s PIN on the modem router
Use this method if your client device has a WPS PIN number.
Step 1:
Keep the default WPS Status as
Enabled
and click the
Add device
button in Figure
4-43, then the following screen will appear.
Figure 4-45
Step 2:
Enter the PIN number from the client device in the field on the above WPS screen. Then
click
Connect
button.
Step 3:
“
Connect successfully
” will appear on the screen of Figure 4-45, which means the
client device has successfully connected to the modem router.
III. Enter the modem router’s PIN on your client device
Use this method if your client device asks for the modem router’s PIN number.
Step 1:
On the client device, enter the PIN number listed on the modem router’s WPS screen. (It
is also labeled on the bottom of the modem router.)
Step 2:
The WPS LED flashes for two minutes during the WPS process.
Step 3:
When the WPS LED is on, the client device has successfully connected to the modem
router.
Step 4:
Refer back to your client device or its documentation for further instructions.
Note:
1)
The WPS LED on the modem router will light green for five minutes if the device has been
successfully added to the network.
2)
The WPS function cannot be configured if the Wireless Function of the modem router is