TP-Link TD-W9970B TD-W9970BEU V1 User Guide - Page 104
Bandwidth Control
View all TP-Link TD-W9970B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
TD-W9970/TD-W9970B 300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide 4.18 Bandwidth Control Choose menu "Bandwidth Control", and then you can configure the Upstream Bandwidth and Downstream Bandwidth in the next screen. The values you configure should be less than 1000000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of the egress and ingress. Figure 4-99 Enable Bandwidth Control: Check this box so that the Bandwidth Control settings can take effect. Line Type: Select the right type for you network connection. If you don't know how to choose, please ask your ISP for the information. Total Upstre am Bandwidth: The upload speed through the WAN port. Total Downstre am Bandwidth: The download speed through the WAN port. De scription: This is the information about the rules such as address range. Priority: Priority of Bandwidth Control rules. '1' stands for the highest priority while '8' stands for the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to guarantee all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first allocated to the rule with the highest priority, then to the rule with the second highest priority, and so on. Upstream bandwidth: This field displays the max and mix upload bandwidth through the WAN port, the default is 0. Downstream bandwidth: This field displays the max and mix download bandwidth through the WAN port, the default is 0. Status: The status of this rule either Enabled or Disabled. Edit: Click Edit to modify the rule. To add/modify a Bandwidth Control rule, follow the steps below. 1. Click Add New shown in Figure 4-99, you will see a new screen shown in Figure 4-100. 2. Enter the information as the screen shown below. 96