TP-Link TD-W9970B TD-W9970BEU V1 User Guide - Page 84
RIP Settings
View all TP-Link TD-W9970B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
TD-W9970/TD-W9970B 300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide Figure 4-66 2. Enter the following data: Destination IP Address: The Destination IP Address is the address of the network or host that you want to assign to a static route. Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion. Gateway: Here you should type the Gateway address correctly, and the option for Interface will adopt the default Gateway address for the Static Route. Interface: Select the Interface name in the text box, or else, the default Use Interface will be adopted for the Static Route. Status: Select Enable d or Disable d from the drop-down list. 3. Click Save to save your settings as shown in Figure 4-66. To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Edit as desired on the Edit column. Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled. Click the Delete Selected button to delete selected entries. 4.11.3 RIP Settings Choose "Route Settings""RIP Settings", you can see the RIP (Routing Information Protocol) screen which allows you to configure the RIP. Figure 4-67 Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 76