TP-Link TL-SC2020 TL-SC2020 V1 User Guide - Page 11
Mount the Camera
View all TP-Link TL-SC2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2.3.2 Rear View Power Jack LAN Port RESET Button Base Plate Power Jack: The power connector is where you connect the power adapter. RESET: Press the button for more than 15 seconds, and the Camera will be restored to factory defaults. LAN Port: Through this port, you can connect the Camera to your computer or the other Ethernet network devices. Lock Ring: It is used to adjust the angle of the Camera. Base Plate: It is used to support the Camera and can be fixed to a flat surface with the supplied screws. 2.4 Mount the Camera 2.4.1 The Screw Size 7
7
2.3.2 Rear View
.3.2 Rear View
Power Jack
LAN Port
RESET Button
Base Plate
Power Jack
: The power connector is where you connect the power adapter.
RESET
:
Press the button for more than 15 seconds, and the Camera will be restored to factory
defaults.
LAN Port
: Through this port, you can connect the Camera to your computer or the other Ethernet
network devices.
Lock Ring
: It is used to adjust the angle of the Camera.
Base Plate
: It is used to support the Camera and can be fixed to a flat surface with the supplied
screws.
2.4 Mount the Camera
2.4.1 The Screw Size