TP-Link TL-SC2020 TL-SC2020 V1 User Guide - Page 12
Hardware Connection
View all TP-Link TL-SC2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
There are three supplied screws for mounting the Camera. The length of the screws is 25±1 mm and the diameter is 4±0.2 mm. 2.4.2 Wall and Ceiling Mount There are two ways to mount the Camera. See the following two pictures. Ceiling Mount Wall Mount To mount the Camera, please follow the steps below: 1. Use the three supplied screws to fix the base plate to a flat surface. 2. Loosen the lock ring to adjust the desired angle of the Camera. 3. Tighten the lock ring. 2.5 Hardware Connection Before proceeding, confirm that your PC is connected to your router and can access the Internet. Make sure that your router's DHCP feature is enabled. If not, please refer to your router's instruction to enable it. Please connect the Camera according to the following steps. 1. Connect the Camera to the LAN network (Router or Switch) via Ethernet cable. 2. Connect the power adapter cord to the Power Jack. 3. Plug the power adapter into the power outlet. 8