Home » TP-Link Manuals » Hubs & Switches » TP-Link TL-SL3428 » Manual Viewer

TP-Link TL-SL3428 User Guide - Page 115

IEEE 802.1p, Image File, Jumbo Frames

UPC - 845973020491

Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

Term I IAD IC ICMP IDRP IEEE IEEE 802.1d IEEE 802.1p EEE 802.1q IGMP IGP Image File Ingress Port IP IP Address IPM TPv6 IPX ISIS J Jumbo Frames K Key Chain L Definition Integrated Access Device. Device that multiplexes varied communication technologies onto a single telephone line for transmission to the carrier. Integrated Circuit. Small electronic devices composed from semiconductor material. Internet Control Message Protocol. Allows the gateway or destination host to communicate with the source host. For example, to report a processing error. Inter-Domain Routing Protocol. Specifies how routers communicate with different domain routers. Institute of Electrical and Electronics Engineers. An engineering organization that develops communications and networking standards. Used in the Spanning Tree Protocol, IEEE 802.1d supports MAC bridging to avoid network loops. Prioritizes network traffic at the data-link/MAC sub-layer. Defines the operation of VLAN Bridges that permit the definition, operation, and administration of VLANs within Bridged LAN infrastructures. Internet Group Management Protocol. Allows hosts to notify their local switch or router that they want to receive transmissions assigned to a specific multicast group. Interior Gateway Protocol. Allows for routing information exchange between gateways in an autonomous network. System images are saved in two Flash sectors called images image 1 and image 2). The active image stores the active copy; while the other image stores a second copy. Ports on which network traffic is received. Internet Protocol. Specifies the format of packets and their addressing method.IP addresses packets and forwards the packets to the correct port. Internet Protocol Address. A unique address assigned to a network device with two or more interconnected LANs or WANs. IP Multicast. Transmits multicast packets in a network. Multicast routing copies one packet to several ports. IP Version 6. Provides a newer version of the Internet Protocol, and follows IP version 4 (IPv4). IPv6 increases the IP address size from 32 bits to 128 bits. In addition, IPv6 support more levels of addressing hierarchy, more addressable nodes, and supports simpler auto-configuration of addresses. Internetwork Packet Exchange. Transmits connectionless communications. Intermediate System to Intermediate System. Provides Link State PDUs (LSPs) authentication by including authentication information as part of the LSP. Enable transporting identical data in fewer frames. Jumbo Frames reduce overhead, lower the processing time, and ensure fewer interruptions. Group of MD5 keys assigned to an interface. Key chains are assigned to interfaces in the RIP or OSPF interface parameters. 108

Section	Page
Preface	8
Guide Overview	8
Intended Audience	9
Section 1. Getting Started	10
1.1 Configuring the device to use TP-Link Embedded Web Interface	10
1.2 Starting the TP-Link Embedded Web Interface	10
1.3 Understanding the TP-Link Embedded Web Interface	11
1.3.1 Device Representation	12
1.3.2 Using the TP-Link Embedded Web Interface Management Buttons	12
1.4 Using Screen and Table Options	13
1.4.1 Adding Configuration Information	13
1.4.2 Modifying Configuration Information	13
1.5 Deleting Configuration Information	13
1.6 Resetting the Device	14
1.7 Logging Off from the Device	14
Section 2. Defining Device Information	15
Section 3. Setting the System Time	16
3.1 Configuring Daylight Savings Time	16
3.2 Configuring SNTP	19
3.2.1 SNTP Overview	19
3.2.1.1 Polling for Unicast Time Information	19
3.2.1.2 Polling for Anycast Time Information	19
3.2.1.3 Polling for Broadcast Time Information	19
3.2.2 Defining SNTP Global Settings	20
3.2.3 Configuring SNTP Authentication	20
3.2.4 Defining SNTP Servers	21
3.2.5 Defining SNTP Interface Settings	22
Section 4. Configuring System Logs	24
4.1 Defining General Log Properties	24
4.2 Viewing Memory Logs	25
4.3 Viewing Flash Logs	25
4.4 Defining System Log Servers	26
Section 5. Configuring Device Security	28
5.1 Configuring Management Security	28
5.1.1 Configuring Authentication Methods	28
5.1.1.1 Defining Access Profiles	28
5.1.1.2 Defining Profile Rules	30
5.1.1.3 Defining Authentication Profiles	31
5.1.1.4 Mapping Authentication Profiles	32
5.1.1.5 Defining TACACS+ Host Settings	34
5.1.1.6 Defining RADIUS Server Settings	35
5.1.2 Configuring Passwords	37
5.1.2.1 Defining Local Users	37
5.1.2.2 Defining Line Passwords	38
5.1.2.3 Defining Enable Passwords	38
5.2 Configuring Network Security	38
5.2.1 Network Security Overview	39
5.2.1.1 Port-Based Authentication	39
5.2.1.2 Advanced Port-Based Authentication	39
5.2.2 Defining Network Authentication Properties	39
5.2.2.1 Defining Port Authentication Properties	40
5.2.2.2 Configuring Multiple Hosts	41
5.2.2.3 Defining Authentication Hosts	42
5.2.3 Configuring Traffic Control	43
5.2.3.1 Managing Port Security	43
5.2.3.2 Enabling Storm Control	44
Section 6. Defining IP Addresses	46
6.1 Defining IP Addressing	46
6.1.1 Defining IP Addresses	46
6.1.2 Defining the Default Gateway	47
6.1.3 Defining DHCP Addresses	47
6.1.4 Defining ARP	48
6.2 Defining Domain Name System	49
6.2.1 Defining DNS Servers	49
6.2.2 Configuring Host Mapping	50
Section 7. Configuring Interfaces	52
7.1 Configuring Ports	52
7.2 Configuring LAGs	54
7.2.1 Defining LAG Members	54
7.2.2 Configuring LACP	55
7.3 Configuring VLANs	56
7.3.1 Defining VLAN Properties	56
7.3.2 Defining VLAN Membership	57
7.3.3 Defining VLAN Interface Settings	58
7.3.4 Configuring GARP	59
7.3.4.1 Defining GARP	59
7.3.5 Defining GVRP	60
Section 8. Defining the Forwarding Database	62
8.1 Configuring Static Addresses	62
8.2 Configuring Dynamic Forwarding Addresses	63
Section 9. Configuring the Spanning Tree Protocol	65
9.1 Configuring the Classic STP	65
9.1.1 Defining STP Properties	65
9.1.2 Defining STP Interface Settings	66
9.2 Configuring the Rapid STP	68
9.3 Configuring the Multiple STP	69
9.3.1 Defining MSTP Properties	69
9.3.2 Configuring MSTP Instances	70
9.3.3 Configuring MSTP VLAN Instances	71
9.3.4 Configuring MSTP Interface Settings	71
Section 10. Configuring Multicast Forwarding	73
10.1 Configuring Multicast Forwarding	73
10.2 Defining Multicast Bridging Groups	74
10.3 Defining Multicast Forward All Parameters	76
Section 11. Configuring SNMP Management	77
11.1 SNMP v1 and v2c	77
11.2 SNMP v3	77
11.3 Defining SNMP Security	77
11.3.1 Defining SNMP Global Parameters	78
11.3.2 Defining SNMP Views	78
11.3.3 Defining SNMP Group Profiles	79
11.3.4 Defining SNMP Group Members	80
11.3.5 Defining SNMP Communities	82
11.3.5.1 SNMP Communities Basic Table	82
11.3.5.2 SNMP Communities Advanced Table	82
11.4 Configuring SNMP Notification Settings	83
11.4.1 Defining SNMP Notification Properties	83
11.4.2 Defining Notification Filters	83
11.4.3 Defining Notification Receivers	84
11.4.3.1 SNMPv1,2c Notification Recipient	85
11.4.3.2 SNMPv3 Notification Recipient	85
Section 12. Configuring Quality of Service	87
12.1 Quality of Service Overview	87
12.1.1 Mapping to Queues	87
12.1.2 QoS Modes	88
12.1.2.1 Basic QoS Mode	89
12.1.2.2 Advanced QoS Mode	89
12.2 Enabling Quality of Service	89
12.2.1 Enabling Quality of Service	89
12.2.2 Defining Queues	90
12.3 Mapping Queues	91
12.3.1 Mapping CoS Values to Queues	91
12.3.2 Mapping QoS Values to Queues	91
Section 13. Managing System Files	93
13.1 Downloading System Files	93
13.1.1 Download Type	93
13.1.2 Firmware Download	94
13.1.3 Configuration Download	94
13.2 Uploading System Files	94
13.2.1 Upload Type	94
13.2.2 Software Image Upload	95
13.2.3 Configuration Upload	95
13.3 Activating Image Files	95
13.4 Copying System Files	95
Section 14. Performing Device Diagnostics	97
14.1 Configuring Port Mirroring	97
14.2 Viewing Integrated Cable Tests	98
14.3 Viewing Optical Transceivers	99
Section 15. Viewing Statistics	100
15.1 Viewing Interface Statistics	100
15.1.1 Viewing Device Interface Statistics	100
15.1.2 Viewing Etherlike Statistics	101
15.1.3 Viewing GVRP Statistics	102
15.1.4 Viewing EAP Statistics	103
15.2 Managing RMON Statistics	103
15.2.1 Viewing RMON Statistics	104
15.2.2 Configuring RMON History	105
15.2.2.1 Defining RMON History Control	105
15.2.2.2 Viewing the RMON History Table	106
15.2.3 Configuring RMON Events	107
15.2.3.1 Defining RMON Events Control	107
15.2.3.2 Viewing the RMON Events Logs	108
15.2.4 Defining RMON Alarms	108

Match case Limit results 1 per page

±0¸

Term

Deﬁnition

IAD

Integrated Access Device.

Device that multiplexes varied communication technologies

onto a single telephone line for transmission to the carrier.

Integrated Circuit

. Small electronic devices composed from semiconductor material.

ICMP

Internet Control Message Protocol

. Allows the gateway or destination host to

communicate with the source host. For example, to report a processing error.

IDRP

Inter-Domain Routing Protocol

. Speciﬁes how routers communicate with different domain

routers.

IEEE

Institute of Electrical and Electronics Engineers

. An engineering organization that

develops communications and networking standards.

IEEE 802.1d

Used in the Spanning Tree Protocol, IEEE 802.1d supports MAC bridging to avoid

network loops.

IEEE 802.1p

Prioritizes network trafﬁc at the data-link/MAC sub-layer.

EEE 802.1q

Defines the operation of VLAN Bridges that permit the definition, operation, and

administration of VLANs within Bridged LAN infrastructures.

IGMP

Internet Group Management Protocol

. Allows hosts to notify their local switch or router

that they want to receive transmissions assigned to a speciﬁc multicast group.

IGP

Interior Gateway Protocol

. Allows for routing information exchange between gateways in

an autonomous network.

Image File

System images are saved in two Flash sectors called images image 1 and image 2). The

active image stores the active copy; while the other image stores a second copy.

Ingress Port

Ports on which network trafﬁc is received.

Internet Protocol

. Specifies the format of packets and their addressing method.IP

addresses packets and forwards the packets to the correct port.

IP Address

Internet Protocol Address

. A unique address assigned to a network device with two or

more interconnected LANs or WANs.

IPM

IP Multicast

. Transmits multicast packets in a network. Multicast routing copies one

packet to several ports.

TPv6

IP Version 6

. Provides a newer version of the Internet Protocol, and follows IP version

4 (IPv4). IPv6 increases the IP address size from 32 bits to 128 bits. In addition, IPv6

support more levels of addressing hierarchy, more addressable nodes, and supports

simpler auto-conﬁguration of addresses.

IPX

Internetwork Packet Exchange

. Transmits connectionless communications.

ISIS

Intermediate System to Intermediate System

. Provides Link State PDUs (LSPs)

authentication by including authentication information as part of the LSP.

Jumbo Frames

Enable transporting identical data in fewer frames. Jumbo Frames reduce overhead,

lower the processing time, and ensure fewer interruptions.

Key Chain

Group of MD5 keys assigned to an interface. Key chains are assigned to interfaces in the

RIP or OSPF interface parameters.