TP-Link TL-WA701ND User Guide - Page 13
The Rear Panel, TL-WA701ND, POWER, RESET, Method one, System Tools, Factory Defaults - external antenna
UPC - 845973051402
View all TP-Link TL-WA701ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide 1.3.2 The Rear Panel Figure 1-2 Viewed from left to right, the following parts are located on the rear panel of TL-WA701ND. POWER: The power port connects to the power adapter provided with the TL-WA701ND 150Mbps Wireless Lite N Access Point. LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router. RESET: The Reset button is used to restore the AP's factory default settings. There are two ways to reset the Access Point's factory defaults: z Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5 seconds) until the System LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings. z Method two: Restore the default settings from "System Tools > Factory Defaults" of the Modem's Web-based management page. Wireless antenna: The external antenna is used to transmit and receive wireless data. ) Note: Ensure the AP is powered on before it restarts completely. 6