TP-Link TL-WA701ND User Guide - Page 26
TL-WA701ND, II. By PIN, Method One, Enabled, Add device, Enter the new device's PIN, Connect., Enter - setup
UPC - 845973051402
View all TP-Link TL-WA701ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my AP Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-4, then the following screen will appear. Step 2: Choose "Enter the new device's PIN" and enter the PIN code (take 16952898 for example) of the wireless adapter in the field after PIN as shown in the figure above. Then click Connect. ) Note: The PIN code of the adapter is always displayed on the QSS configuration screen as shown in the following figure. Step 3: For the configuration of the wireless adapter, please choose "Enter a PIN into my access point or a registrar" in the configuration utility of the QSS as below, and click Next. 19