TRENDnet TFM-PCIV92A User Guide - Page 13

TFM-PCIV92A User's Guide _____ Register S28* S30* S32* S33* S35* S37* S38* Function Default Range Units = 101 X2 is selected = 110 X3 is selected = 111 X4 is selected Bit 7 = 0 33/67 M/B ratio is selected(&P1, &P2) = 1 39/61 M/B ratio is selected(&P0) Control V.34 modulation 1 0-1 - = 0 Disables V.34 modulation = 1 Enables V.34 modulation Inactivity timer 0 0-255 minute Synthetic ring volume 10 0-255 - Synthetic ring frequency 0 0-5 - Data calling tone 0 0-1 = 0 Disables data calling = 1 Enables data calling Maximum line speed attempted 0 0-19 - = 0 Auto rate = 1 Reserved = 2 1200/75 bps = 3 300 BPS = 4 Reserved = 5 1200 BPS = 6 2400 BPS = 7 4800 BPS = 8 7200 BPS = 9 9600 BPS = 10 12000 BPS = 11 14400 BPS = 12 16800 BPS = 13 19200 BPS = 14 21600 BPS = 15 24000 BPS = 16 26400 BPS = 17 28800 BPS = 18 31200 BPS = 19 33600 BPS K56flex downstream rate 1 0-14 - = 0 Disables K56flex - 23 - Rev.1.00.2.1.34 TFM-PCIV92A User's Guide _____ Register Function Default Range = 1 Auto rate = 2 32K BPS = 3 34K BPS = 4 36K BPS = 5 38K BPS = 6 40K BPS = 7 42K BPS = 8 44K BPS = 9 46K BPS = 10 48K BPS = 11 50K BPS = 12 52K BPS = 13 54K BPS = 14 56K BPS S48* Error control feature 7 7,128 = 7 Negotiation enabled = 128 Negotiation disabled S89* Sleep mode timer 10 0,5-65 S108 * Network codec type 7 7,22,33 = 7 Specified by central site mode = 22 u-law = 33 A-law Notes : The value of the S-registers marked with (*) were saved in NVRAM Units second - - 24 - Rev.1.00.2.1.34