Tecumseh Products OVRM120 Operator Manual - Page 16
Oil Fill Cap With Dipstick - engine
View all Tecumseh Products OVRM120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
I. Oil Fill Cap With Dipstick If your engine has a dipstick go to step 1. If your engine does NOT have a dipstick, see "II. Oil Fill Cap Without Dipstick (Oil Fill Plug)" instructions on page 16. 1. Carefully disconnect spark plug wire and keep it away from spark plug. See Figures 30 and 31. See "G. Avoid Accidental Starts" instructions on page 2. Afterward, continue reading instructions below. • Keep the disconnected spark plug wire securely away from metal parts where arcing could occur. • Carefully attach the spark plug wire to the grounding post, if provided. Figure 30. Disconnecting/Connecting Spark Plug 2. Be sure gas cap is on and tightened securely. See Figure 32. Figure 31. Typical Spark Plug Connection 3. Be sure you find the correct oil drain plug location, if present (see equipment manufacturer's instructions). See Figure 33. 4. Clean area around oil drain plug. See Figure 33. Figure 32. Gas Cap Page 14 Figure 33. Oil Drain Plug Four-Cycle Engine • Vertical Crankshaft • Air-Cooled 181-1216-14