Thermador VTR630P Installation Manual - Page 5
Step 3: Installation
View all Thermador VTR630P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Step 3: INSTALLATION 1. Hold the blower on the wall. Note the direction of the air conduction. 2. Mark the 4 mounting boreholes. • At least one screw must be installed through a stud. • All hardware must be suitable for the wall's construction materials. • Ensure the air outlet points downward. 3. Wall break: Mark and drill a guide hole and a separate hole for electrical conduit. 4. Drill the 4 x ¼'' (6,3 mm) Ø mounting boreholes. Insert wall anchors and screw the blower to the wall. 5. Connect the ducting from the blower to the extractor hood and feed to the outside. min. Ø ¾" (19 mm) ½" (12.7 mm) min. 40" (101.5 cm) 315/16" (100 mm) min. Ø 6½" (16.5 mm) 5¼" (133 mm) 10⅞" (276 mm) 8 5/16" (211 mm) 13/16" (21 mm) 16 11/16" (424 mm) English 3