Thermador VTR630P Installation Manual - Page 6
Warning
View all Thermador VTR630P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6. Connect the blower to the extractor hood with an extension cable, if required. Use the added connector to hard-wire to the blower, if required. Use the wire diagram for connecting. WARNING • The additional cover on the plug must always be attached and closed for safety reasons. • Not needed wires must be isolated, capped with wire nuts and stored in a safe position. 13/16" (21 mm) NOTE: Confirm that the blower is securely attached to the wall and all connections are secure. NOTE: The unit can also be installed on the roof in combination with a roof plate accessory (RFPLT600P or RFPLT1000P). Ask your retailer or contact the Thermador Customer Service Team at 1-800-735-4328. English 4
English 4
6.
Connect the blower to the extractor hood with an
extension cable, if required.
Use the added connector to hard-wire to the blower, if
required.
Use the wire diagram for connecting.
NOTE:
Confirm that the blower is securely attached to the
wall and all connections are secure.
NOTE:
The unit can also be installed on the roof in
combination with a roof plate accessory (RFPLT600P or
RFPLT1000P). Ask your retailer or contact the Thermador
Customer Service Team at 1-800-735-4328.
±
WARNING
•
The additional cover on the plug must always be
attached and closed for safety reasons.
•
Not needed wires must be isolated, capped with wire
nuts and stored in a safe position.
(21 mm)
(21 mm)
13
/
16
"
13
/
16
"
13
/
16
"