Toro 51347 Operation Manual - Page 3
Setup, Operation - line trimmer
UPC - 021038513478
View all Toro 51347 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Setup Adjusting the Assist Handle 1. Loosen the knob (A), then move the assist handle up or down the shaft to your desired height. 2. Pivot the assist handle to a comfortable position (B), then tighten the knob. A B m-7852 Installing the Guard 1. Slide the guard onto the trimmer, ensuring that the tabs on the guard slide into the rectangular holes in the trimmer housing on both sides. Operation Warning During operation, the trimmer may throw objects in the operator's or a bystander's direction, causing injury. S Wear safety goggles or other suitable eye protection, long pants, and shoes while operating the trimmer. S Keep bystanders away from the work area. Warning When the trimmer is running the cutting head is spinning. If you contact the cutting line or cutting head, you could be injured. S Keep the cutting head away from your hands, feet, and bystanders. Keep the guard in place and in working order. S Wear shoes and long pants when using the trimmer. S Ensure that the cutting head has stopped and you disconnect the trimmer from the power source before you service or examine the cutting head. Do not start the trimmer unless your hands are on both handles and the cutting head is down near the ground. S Do not allow the trimmer to cut into the cord. 2. Snap the guard into place and secure the hooks under the guard on to the trimmer. m-6314/6696 m-6326 3352-881