Toshiba 20A44 Owners Manual - Page 8

SETTING THE LANGUAGE This TV can display the on-screen displays and adjustment menus in English, Spanish, or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 Press MENU. 2 Press SET + or - to select the LANGUAGE mode, then press ENTER. MENU CH SETUP PICTURE AUDIO LANGUAGE V-CHIP SET LOCK ON TIMER ENTER / MENU 〉 3 Press SET + or - until the " A " indi- cator points to the desired LANGUAGE / IDIOMA / LANGUE language: English (ENGLISH), ENGLISH Spanish (ESPAÑOL) or French ESPAÑOL (FRANCAIS), then press ENTER. FRANCAIS 4 Press MENU repeatedly until the menu screen is cleared. 〈 + / - / ENTER / MENU 〉 NOTE: If Spanish or French is chosen, the closed caption indicators will be in the selected language, but the closed caption text will not be affected by the language selection. TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting. TV/CABLE SELECTION 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "TV/CABLE" begins to flash. 4 Press ENTER to select the TV or CABLE mode. The arrow indicates the selected mode. MENU CH SETUP PICTURE AUDIO LANGUAGE V-CHIP SET LOCK ON TIMER 〈 + / - / ENTER / MENU 〉 TV CABLE AUTO CH MEMORY ADD / DELETE 〈 + / - / ENTER / MENU 〉 5 Press MENU repeatedly until the menu screen is cleared. NOTE: Contact your cable company to determine the type of cable system used in your area. AUTOMATIC CHANNEL MEMORY 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "AUTO CH MEMORY" begins to flash, then press ENTER. The TV will begin memorizing all the channels available in your area. Channel numbers will remain red until auto memorizing is complete. MENU CH SETUP PICTURE AUDIO LANGUAGE V-CHIP SET LOCK ON TIMER 〈 + / - / ENTER / MENU 〉 TV CABLE AUTO CH MEMORY ADD / DELETE 〈 + / - / ENTER / MENU 〉 TO ADD/DELETE CHANNELS 1 Press MENU. 2 Press SET + or - until the indicator next to "CH SETUP" begins to flash, then press ENTER. 3 Press SET + or - until the indicator next to "ADD/DELETE" begins to flash, then press ENTER. 4 Select the desired channels to be added or deleted using the Direct Channel Selection buttons (0-9), CH + or -, SET + or -. MENU CH SETUP PICTURE AUDIO LANGUAGE V-CHIP SET LOCK ON TIMER 〈 + / - / ENTER / MENU 〉 TV CABLE AUTO CH MEMORY ADD / DELETE 〈 + / - / ENTER / MENU 〉 5 Press ENTER to select ADD or DELETE. If an unmemorized channel was selected (step 4), the channel indication will be red. Press ENTER if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the chan- nel indication will be green. To delete the channel from memory, press ENTER repeatedly until "DEL" appears on-screen. The channel ADD CH 012 indicator will change from green to red when a channel is deleted. Repeat Steps 4 and 5 for each channel to be 〈0 - 9 / + / - / ENTER / MENU〉 added or deleted. 6 Press MENU repeatedly until the menu screen is cleared. 4 Press MENU repeatedly until the menu screen is cleared. 8 3M91301A-E P08-11 8 Downloaded from www.Manualslib.com manuals search engine 13/2/04, 2:06