Toshiba 34HF84 User Manual - Page 10

Introduction Connecting your TV Using the Remote Control Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables • one set of standard A/V cables (between the TV and VCR) (plus one additional set of standard A/V cables if satellite receiver is used) • one S-video cable (between the TV and DVD player/satellite receiver) • one pair of standard audio cables (between the TV and DVD player/satellite receiver) Stereo VCR From Antenna IN from ANT OUT to TV CH 3 CH 4 TV VIDEO IN OUT L R AUDIO Note: For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 11. If your DVD player or satellite receiver has HDMI, see page 14.) Do not connect both an S-video cable and a standard video cable between the TV and DVD player/satellite receiver at the same time or the picture performance will be unacceptable. Do not connect the DVD player/satellite receiver and VCR to the same video channel on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the TV, and the VCR connected to Video-2 on the TV.) The unauthorized recording, use, distribution, or revision of television programs, videot apes, DVDs, and other materials is prohibited under the Copyright L aws of the United St ates and other countrie s, and may subject you to civil and criminal liability. From Satellite Dish S-VIDEO VIDEO OUT OUT IN from ANT S-VIDEO VIDEO OUT OUT AUDIO OUT L R DVD Player Satellite Receiver AUDIO OUT L R Setting up your TV Using the TV's Features Appendix Index 10 #01E07-15_34HF84 10 (E) 34HF84 5/11/04, 1:56 PM