Toshiba 36AF61 Owners Manual - Page 17

Welcome to Toshiba Connecting your TV Using the Remote Control Setting up your TV Selecting the signal source To select the signal source to view: Repeatedly press TV/VIDEO on either the remote control or the TV. TV VIDEO 1 VIDEO 2 VIDEO 3 ColorStream TO SELECT PUSH TV/VIDEO VIDEO 1 VIDEO 2 VIDEO 3 ColorStream ANT 1 ANT 2 TO SELECT PUSH TV/VIDEO Pressing TV/VIDEO on the remote control Pressing TV/VIDEO on the TV To display the current signal source: Press RECALL. Programming channels into the TV's memory When you press CHANNEL LM on the TV or remote control, the TV stops only on the channels stored in the TV's memory. Note: To tune the TV to a channel not programmed into the memory, use the CHANNEL NUMBERS on the remote control. Follow the steps below and on the next page to program channels into the TV's memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them in the TV's memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 18). If you use both ANT-1 and ANT-2 terminals, you will need to program channels for each signal source. To program channels automatically: 1. Press MENU. 2. Press x or • to highlight the SET UP menu. 3. Press y or z to highlight TV/CABLE. 4. Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable). 5. Press z to highlight CH PROGRAM. TV/Video Channel DEMO MENU TV/VIDEO VOLUME CHANNEL Menu POWER LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER 12 45 3 CH 6 78 9 VOL CH RTN 100 0 ENT ADV/ PIP CH TV/VIDEO CH (Channel) Channel Numbers MENU FAV ENTER FAV C.CAPT EXIT MENU RESET ADV/ PIP CH SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL ANT1/2: [ANT1] ANT2 TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE MORE MOVE [ ] SELECT [ ] SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL ANT1/2: TV/CABLE: [ANT1] ANT2 [TV] CABLE CH PROGRAM ADD/ERASE: MORE [ADD] ERASE MOVE [ ] SELECT [ ] 6. Press x or • to start automatic channel programming ("CH PROGRAM" displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV's memory. 7. When automatic channel programming is complete, the message "CH Programming Completed" appears. 8. Press CHANNEL LM to view the programmed channels. Using the TV's Features Appendix Index Reference 17