Toshiba 50HMX96 Owner's Manual - English - Page 55
To select the MPEG noise reduction level, To select the color temperature, To select the lamp mode
UPC - 022265251577
View all Toshiba 50HMX96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
HMX96_EN.book Page 55 Friday, April 28, 2006 12:03 PM Chapter 6: Using the TV's advanced features Using MPEG noise reduction The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled ("grayed out"). To select the MPEG noise reduction level: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 Press B or b to highlight the MPEG Noise Reduction field, and then press C or c to select either Off, Low, Middle or High. Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Vertical Edge Enhancer Color Management GCaomloer Maondeagement Reset High Auto Low Cool Low Power Middle ANT 1 Off Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below. Mode cool medium warm Picture Quality blueish neutral reddish To select the color temperature: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 In the Color Temperature field, select the mode you prefer (Cool, Medium, or Warm). Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Vertical Edge Enhancer Color Management GCaomloer Maondeagement Reset High Auto Low Cool Low Power Middle ANT 1 Off Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu. Selecting the lamp mode You can select either the High Bright or Low Power lamp mode. • The High Bright mode is useful when additional picture brightness is desired (such as in a bright room). To select the lamp mode: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 In the Lamp Mode field, select High Bright or Low Power, whichever you prefer. Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Vertical Edge Enhancer Color Management GCaomloer Maondeagement Reset High Auto Low Cool Low Power Middle ANT 1 Off Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: If you set the lamp mode to Low Power, each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time. You may notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction. 55 HMX96 (E/F) Web 213:276