Toshiba 72HM195 Owner's Manual - English - Page 20

Chapter 2: Connecting your TV Connecting a digital audio system The TV's DIGITAL AUDIO OUT terminal outputs a Dolby* Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system with optical audio input. You will need: one optical audio cable (Use an optical audio cable that has the larger "TOSlink" connector and not the smaller "minioptical" connector) To control the audio: Turn on the TV and the digital audio device. Press MENU on the TV's remote control and open the AUDIO menu. Highlight Audio Setup and press ENTER. In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (see "Selecting the optical audio output format" Audio on page 86). Audio Settings Advanced Audio Settings Audio Setup Audio Setup MTS Language Speakers Optical Output Format Reset Stereo English On Dolby Digital Done Turn off the TV's built-in speakers in the same Audio Setup menu (above). Also see "Turning off the built-in speakers" on page 86. Connecting an analog audio system Dolby Digital decoder or other digital audio system TV LINE IN LR Optical Audio IN Note: • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. • The DIGITAL AUDIO OUT terminal outputs signals only when receiving digital broadcasts with the TV in single-window mode. • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. This connection allows you to use external speakers with an external audio amplifier to adjust the sound level. You will need: one pair of standard audio cables To control the audio: Turn on the TV and the stereo amplifier. TV Turn off the TV's built-in speakers (see "Turning off the built-in speakers" on page 86). Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set to a reasonable listening level. Analog audio amplifier LINE IN LR OUT 20 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.