Toshiba A100 VA3 Maintenance Manual - Page 122

3.8 USB Floppy Disk Test 3.8 USB Floppy Disk Test 3 Tests and Diagnostics Caution: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. Otherwise, the contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5-FLOPPY DISK TEST from the DIAGNOSTIC TEST MENU, press Enter. 1. The following message will appear. Select the kind of drive, the kind of media, the media mode and the start track of the floppy disk drive to be tested, press Enter. Test start track (Enter:0/dd:00-79) 2. The Floppy Disk test contains five subtests that test the FDD. The floppy disk test menu will appear after you select FDD test parameters. SUB-TEST MENU: 01-Sequential read 02-Sequential read/write 03-Random address/data 04-Write specified address 05-Read specified address 99-Exit to DIAGNOSTIC TEST MENU Select the number of the subtest you want to execute and press Enter. The following message will appear during the floppy disk test. Floppy Disk XXXXXXX SUB-TEST PASS COUNT:XXXXX COUNT:XXXXX WRITE DATA:XXXXX DATA :XX ADDRESS :XXXXXX ERROR READ STATUS :XXX xxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ;test end [Ctrl]+[C] ;key stop PORTEGE A100 Maintenance Manual (960-460) 3-23