Toshiba A20-S259 Maintenance Manual - Page 195

3 Tests and Diagnostics 3.26 SETUP (d) Auto Power On Use this option to set a time and date for automatic power on and enable or disable the ring indicator feature. Ring Indicator displays only when the computer is in Resume mode and the Alarm Date Option displays when Alarm Time is enabled. OPTIONS Alarm Time Alarm Date Option Ring Indicator Wake-up on LAN = 00:00:00 = Disabled = Disabled* = Disabled** * only for Modem Model **only for LAN Model Alarm Time is set in the sequence of hours and minutes. Seconds cannot be changed. Alarm Date Option is set in the sequence of month and day. If Alarm Date is set to Disabled, the computer will be powered on at the same time every day. Press ↓ to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time. NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option. 2. If you have set a password and the computer boots by the Auto Power On function and Resume is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer. (e) Panel Power On/Off This option lets you set the Panel Power On/Off function. It is effective only in Resume mode. Enabled Enables the Panel Power On/Off. Disabled Disables the Panel Power On/Off (Default) 8. System Date/Time Use this option to set the computer's system date/time. Press ↓ to move the cursor to the right and press ↑ to move the cursor to the left. Press the space bar to increase the number and press BkSp to decrease the number. (a) System Date Use this option to set the system date of the computer. 3-80 Satellite A20 Maintenance Manual (960-444)