Toshiba A20-S259 Maintenance Manual - Page 409
eight screws., Fixing the PCB and the bezel
View all Toshiba A20-S259 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 409 highlights
4 Replacement Procedures 4.30 Fluorescent Lamp Fasten screws of the PCB and bezel 1. Fasten the four screws on the left edge in the order (5), (6), (7), and (8) shown in Figure 4148. 2. Fasten the four screws on the right edge in the order (1), (2), (3), and (4) shown in Figure 4-148. CAUTION: Fasten the screws in the orders shown in Figure 4-148. No loose fastening is allowed. The tightening torque must not exceed 0.147N•m (1.5kgf•cm) for all the eight screws. For the Philips screwdrivers, use an insert bit of point size 0. Figure 4-148 Fixing the PCB and the bezel 4-190 Satellite A20 Maintenance Manual (960-444)
4
Replacement Procedures
4.30
Fluorescent Lamp
4-190
Satellite A20 Maintenance Manual (960-444)
Fasten screws of the PCB and bezel
1.
Fasten the four screws on the left edge in the order (5), (6), (7), and (8) shown in Figure 4-
148.
2.
Fasten the four screws on the right edge in the order (1), (2), (3), and (4) shown in Figure
4-148.
CAUTION:
Fasten the screws in the orders shown in Figure 4-148. No loose fastening is
allowed.
The tightening torque must not exceed 0.147N
•
m (1.5kgf
•
cm) for all the
eight screws.
For the Philips screwdrivers, use an insert bit of point size 0.
Figure 4-148
Fixing the PCB and the bezel