Toshiba MD20FN1 Owners Manual - Page 36
Connections to Other Equipment
View all Toshiba MD20FN1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Connections to other equipments The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as shown below. Rear of TV/DVD Front Speaker (Left) TV/DVD Subwoofer Front Speaker (Right) Coaxial Digital Audio Output Coaxial digital cable (not supplied) To Coaxial Digital Audio Input Center Speaker AV Amplifier with built-in digital surround decoder as listed above Surround Speaker (Left) Surround Speaker (Right) * Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. * "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. NOTES: • When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. • When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs. • Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit. 36