Toshiba SD-4100 Owner's Manual - English - Page 9
Connecting to a Digital AV Receiver, Connecting the power cord - not loading
UPC - 022265001318
View all Toshiba SD-4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Connecting to a Digital AV Receiver Connections Connecting the power cord Receiver has a PCM, Dolby Digital or MPEG decoder A Select one of the video connections (CVBS VIDEO IN, S-VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV. B Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). C Set the DVD Player' s Digital Output to PCM-Only or ALL depending on the capabilities of your Receiver (see page 19 {Digital Output}). Tip: -If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. MAINS After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. "----" will appear on the display window when you press the ON/STANDBY button with no disc loaded. Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.