Toshiba SD-4109X Owners Manual - Page 18

Connections nnecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment. For connection to your TV, see "Connecting to a TV" [16) 17). For details of output sound, see [33). : Front speaker u : Rear speaker u : Sub woofer : Center speaker i=> : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. ( Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. • Use DVD video discs encoded via the Dolby Digital recording Amplifier equipped with a Dolby Digital decoder 000 0 0 system. • Make the following setting. To OPTICAL To COAXIAL type digital k_JV type digital audio input audio input eeee Connect either. 75 S2 coaxial cable Optical digital cable Setting To BITSTREAM "Audio Out Select" /PCM AUDIO OUT Recording system Select: "Bitstream" DO Page 35) I39) [33> Connecting to an amplifier equipped with 5.1ch audio inputs 5.lch surround sound The Dolby Digital decoder equipped with this DVD video player enables you to obtain the full benefit of 5.1 channel Dolby Digital sound tracks when you connect the DVD video player to a Dolby Digital ready amplifier equipped with 5.1 channel audio inputs. • Use DVD video discs encoded via the Dolby Digital recording System. • Make the following setting. Amplifier equipped with 5.1ch audio inputs To 5.1ch audio inputs To 5.1CH SURROUND AUDIO OUT Audio cable leo° 0 0 e• Setting Select: Page 35 "Audio Out Select" "Analog 6ch" 39) Recording system DO [33) 2 channel sound is output in the Do by Pro Logic format. To obtain the original 2 channel sound, select "Analog 2ch." Connecting to an amplifier equipped with Dolby Pro Logic Surround Dolby Pro Logic Surround You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). • With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Pro Logic Surround sound. • With an amplifier not equipped with Dolby Digital Connect the equipment as follows. • Make the following setting. Setting Select: Page "Audio Out Select" "Analog 2ch" [ig) [39> Amplifier equipped with Dolby Pro Logic Surround To audio input To 2CH AUDIO OUT o®e6- 71 Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Pro Logic Surround using this connection. lys Audio cable • Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.