Toshiba SD-5915 Owners Manual - Page 17
Connecting to an amplifier equipped with a Dolby Digital decoder, Connecting to an amplifier
View all Toshiba SD-5915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connections Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home.You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit or Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Amplifier equipped with a Dolby Digital decoder COAXIAL To COAXIAL type digital audio input 75 Ω coaxial cable To COAXIAL DIGITAL AUDIO OUT Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D system are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. • Use DVD video discs encoded via the Dolby Digital recording system. • Make the following setting. On-screen display Select Page "Digital Out" "Raw" 38 or "PCM" 43 Connecting to an amplifier equipped with a Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). • With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital Decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. • With an amplifier not equipped with Dolby Digital Connect the equipment as follows. • Make the following setting. On-screen display Select "Digital Out" "Raw" or "PCM" Page 38 43 * Amplifier equipped with Dolby Sourround Pro Logic COAXIAL To audio input Audio cable To ANALOG AUDIO OUT * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. 17