Toshiba TDP-ET10U User Manual - Page 54
Trouble indications
View all Toshiba TDP-ET10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Trouble indications The indicator lights inform you of internal abnormalities. LED indicators State/Problems No LED lit No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. ⇒ The lamp cover is not properly attached. • Unplug the power cord, and reattach the lamp cover. Red LED is flashing at ON/ STANDBY indicator (2Hz) Power went out during use ⇒ Internal overheating, or the outside temperature is too high. • Place the projector so that the air intake and exhaust are not blocked. • Unplug the power cord and wait for a short while, then turn the power back on. ❈ The icon will appear before the power goes out. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Red LED is flashing at ON/ STANDBY indicator (5Hz) Power went out during use ⇒ Problem with internal cooling fan. • Unplug the power cord, and contact your dealer. ❈ The icon will appear before the power goes out. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Red LED lit at ON/STANDBY indicator Power went out during use, or won't come on ⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of the lamp has ended or the projector is malfunctioning. • Unplug the power cord and wait for a short while, then turn the power back on. • If a lamp burns out, replace it with a new one. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Others 53