Toshiba TDP-FF1A User Manual - Page 23
Placement
View all Toshiba TDP-FF1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparations Placement Placement Styles The factory setting is "floor-mounted front projection." Set the [Projection mode] in the Default setting menu , in accordance with your needs. Warning • Always observe the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Projection Distance and Size Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.) Screen Top view a (min length) = projection size (inches) 8.3333 FF1 uses a fixed lens. Side view Lens center projection size (inches) 11 17 25 30 35 40 45 50 60 68 projection distance (ft) 1.32 2.04 3.00 3.60 4.20 4.80 5.40 6.00 7.20 8.16 height (H) (in) 0.3 1.0 1.5 1.8 2.1 2.4 2.7 3.0 3.6 4.1 Note: 110% offset condition a is the distance (m) between the lens and the screen, and corresponds to a range of 1.3 ft to 8.2 ft. H is the height from the image bottom to the center of the lens. 23