Toshiba TDP-TW300U Owners Manual

Toshiba TDP-TW300U Manual

Toshiba TDP-TW300U manual content summary:

  • Toshiba TDP-TW300U | Owners Manual - Page 1
    OWNER'S MANUAL DATA PROJECTOR TDP-TW300 Others Maintenance Operations Preparations Before Using
  • Toshiba TDP-TW300U | Owners Manual - Page 2
    user to the presence of important operating and maintenance (servicing) instructions eiae.org. MODEL NAME: TDP-TW300 FCC Radio Frequency Interference in accordance with the instruction manual, may cause harmful USA only Toshiba, or parties authorized by Toshiba, could void the user's authority
  • Toshiba TDP-TW300U | Owners Manual - Page 3
    TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. 3. Source of Light Do not look into the lens while the lamp is on. The strong
  • Toshiba TDP-TW300U | Owners Manual - Page 4
    by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area. 18. Servicing Do not attempt to service
  • Toshiba TDP-TW300U | Owners Manual - Page 5
    service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users • Moving the projector from a low-
  • Toshiba TDP-TW300U | Owners Manual - Page 6
    to the user" supplied. EXEMPTION CLAUSES • Toshiba Corporation bears other problems. • Toshiba Corporation bears Instruction Manual. • Toshiba lamp contains mercury. Please dispose of this product or used lamps , or if the operating range becomes reduced, replace both batteries with new ones. • If the
  • Toshiba TDP-TW300U | Owners Manual - Page 7
    INSTRUCTIONS Projector Configuration Tool 78 Maintenance About lamp ...80 Lamp replacement 80 Lens and main unit cleaning 83 Others Trouble indications 84 Before calling service personnel 85 Specifications ...87 List of general specifications 87 Separately sold product 87 List of supported
  • Toshiba TDP-TW300U | Owners Manual - Page 8
    any other antitheft device. : Expels air that has grown hot inside the projector. : Remove to mount/remove the PC card. p.23 : Operates the projector. p.16 : Remove to replace lamp. p.79 : Draws in air from outside the projector. : Outputs audio sound. : Connects external devices. p.18 : Adjusts the
  • Toshiba TDP-TW300U | Owners Manual - Page 9
    screen. : Menu selections and adjustments, volume control, etc. p.38 : Displays lamp mode. p.27 : Lights when internal temperature too high. p.82 : Displays control to that of the projector. (inside the battery cover) p.45 Note • For the remainder of this manual, buttons are referred to as
  • Toshiba TDP-TW300U | Owners Manual - Page 10
    (1) Infrared remote sensor : Senses commands from the remote control. p.20 (2) CONTROL terminal LAN : Connects a network cable. RS232C : When operating the projector via a computer, connect this to the controlling computer's RS-232C port. p.89 (3) COMPUTER (Y/PB/PR) 2 IN terminal RGB : Input
  • Toshiba TDP-TW300U | Owners Manual - Page 11
    5m Two batteries (LR03, SIZE AAA) are used. e Replace the battery cover. • Operating the projector from the rear Approx. 15° Approx. 5m Dry-cell can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does
  • Toshiba TDP-TW300U | Owners Manual - Page 12
    rear projection WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to
  • Toshiba TDP-TW300U | Owners Manual - Page 13
    Connection Before connection • Read the owner's manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.86 , etc. • Turn off the power of both devices before connecting. •
  • Toshiba TDP-TW300U | Owners Manual - Page 14
    the projector goes into standby mode. When cooling lamp During internal cooling After cooling complete A B C A During cooling, the LAMP indicator , there is no problem with unplugging the power cord or turning off the main power switch in this state. B After the LAMP indicator goes off,
  • Toshiba TDP-TW300U | Owners Manual - Page 15
    the instructions in language. Then, the menu for lamp power selection and configuration is manual of your computer. • If no signal is being input from the connected equipment or signal input is stopped while projecting, the "No signal" will appear. • If a signal not supported by the projector
  • Toshiba TDP-TW300U | Owners Manual - Page 16
    may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.86 , p.87 . • If auto setting fails adjustment, adjust manually with the Image adjustment menu p.39 . 30 ■ Correcting the keystone distortion When the
  • Toshiba TDP-TW300U | Owners Manual - Page 17
    may not be properly made. When such a case arises, make correction manually. ■ Resizing image The projected image can be resized (zoomed in/out When you want to project the images of another projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Press
  • Toshiba TDP-TW300U | Owners Manual - Page 18
    handy features (Continued) ■ Display a sub screen (PIP function) Another image can be added in smaller size (referred as sub screen in this manual) to the projected image (referred as main screen). Remote Control Press the remote control's PIP button. A sub screen is displayed in the currently
  • Toshiba TDP-TW300U | Owners Manual - Page 19
    operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric . If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode. How to cancel password (from
  • Toshiba TDP-TW300U | Owners Manual - Page 20
    ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button are options. Press or to display a list of options. Off Off On Manual Low Standard 1 Key lock Yes These marks signify that there are setting screens
  • Toshiba TDP-TW300U | Owners Manual - Page 21
    [ :Selection] [Apply: ] Logo/Blue/None Icon Display icons as function guides On Off Beep Sound a beep when operation is done. On Off Start-up start-up screen when power is turned on On Off User logo Display a logo customized by the user for the start-up screen or when there is no
  • Toshiba TDP-TW300U | Owners Manual - Page 22
    (Continued) [Background] • TOSHIBA is set for [Logo] by factory setting. • If user's logo has been registered, it is displayed when [Logo] is set for background. [Start-up screen] If user's logo has been registered and this setting is [On], the logo is displayed at start-up. [User logo] Registers
  • Toshiba TDP-TW300U | Owners Manual - Page 23
    (Manual), or when the power cord is plugged in (Auto). Manual Auto Lamp power Sets the lamp power. Low Standard Fan mode Sets the cooling fan speed. Standard High Wireless standby Switch on/off the wireless LAN while the projector Press . (The password and user logo are not reset.) Resets
  • Toshiba TDP-TW300U | Owners Manual - Page 24
    subnet mask, and gateway, then set the following items manually: : This is a unique number assigned for the specified E-mail address when an error such as lamp blowout occurs. : Set an IP not to authenticate the user by password when the projector is accessed via the
  • Toshiba TDP-TW300U | Owners Manual - Page 25
    replacement lamp (sold separately) prepared. 4: [Version] shows the version of the projector's internal control program. This version is referred to for customer service PC card enables you to connect the projector wirelessly with a personal computer that supports IEEE802.11b/g based wireless LAN.
  • Toshiba TDP-TW300U | Owners Manual - Page 26
    ■ Communication mode This projector supports both Ad hoc and specifications of your computer for the distance that the radio wave can reach. The coverage of this projector may vary, depending on the computer and the surrounding environment. When tested with a PC manufactured by Toshiba
  • Toshiba TDP-TW300U | Owners Manual - Page 27
    settings (Be sure to read this subsection.) The factory settings can be used as-is. However, if you need higher security, the projector settings should be changed. 1. Press the MENU button twice The Setting display (2) is displayed. * Appears only when Wireless/Card or USB memory input. 2. Select
  • Toshiba TDP-TW300U | Owners Manual - Page 28
    • [Easy Connect (USB)] This feature allows users to easily connect the projector to a computer over wireless networks, without making network change the channel, start up the projector before the computer. This is an ID code for connecting to specific individuals over a wireless LAN. This
  • Toshiba TDP-TW300U | Owners Manual - Page 29
    Computer settings Refer to instruction manuals of your computer users to easily connect the projector to a computer over wireless networks, without making network setting. For Config Free support, the computer requires a wireless LAN environment that is NDIS5.1 compliant. Refer to the userís manual
  • Toshiba TDP-TW300U | Owners Manual - Page 30
    storage media types This projector supports the following types of ATA-compliant storage media. This owner's manual refers to the combination of the ATA conversion adapter and media in use as a "memory PC card." Storage media that can be used as-is Flash ATA card, TOSHIBA Mobile Disk Storage media
  • Toshiba TDP-TW300U | Owners Manual - Page 31
    the icon upon the start of playing a slide show and turns it off after a few seconds. Icon Off: The projector does not display the icon. • Continuous The projector keeps the icon displayed during the slide show. • [Thumbnail preview] Select the form of thumbnail preview. All: Displays a thumbnail
  • Toshiba TDP-TW300U | Owners Manual - Page 32
    Name Previous page exists Operation Guide Orange frame: currently selected file that the JPEG or other file is not supported. When the Thumbnail preview is set to Off to the procedure in "Mounting a PC card" p.23 . The projector starts loading data from the memory PC card and displays a thumbnail
  • Toshiba TDP-TW300U | Owners Manual - Page 33
    Application Device Version The name of the application currently running on the projector is displayed. (Examples: Slideshow, Wireless Utility) When no device a piece of software (hereafter the Software) licensed to TOSHIBA CORPORATION (hereafter TOSHIBA) by AXE, Inc. (hereafter AXE). The copyright
  • Toshiba TDP-TW300U | Owners Manual - Page 34
    your computer. ■ System Requirements Supported OS: Windows® 2000, and run setup.exe. Follow the instructions on your computer screen. During the Programs], and remove Toshiba Data Projector from currently installed manually. See step 6 for the meanings of Update automatically and Update manually
  • Toshiba TDP-TW300U | Owners Manual - Page 35
    's screen for few seconds. It is possible to select up-to four projectors. 6 Click on the button. When "Update automatically" is selected in step 2 Screen images are sent consecutively after the When "Update manually" is selected in step 2 button is clicked. A single screen image is sent
  • Toshiba TDP-TW300U | Owners Manual - Page 36
    ■ Easy Connect utility This feature allows users to easily connect the projector to a computer over wireless networks, appears, proceed as instructed in the message. 4 The projector name of the connected projector or the MAC address manually. The setting information is saved to the USB memory
  • Toshiba TDP-TW300U | Owners Manual - Page 37
    ) 4 Unplug the USB memory from the computer. To unplug the USB memory, follow the instructions in the user s manual supplied with the USB memory or the computer. • Setting on the projector 1 Turn the projector power on. 2 Insert the supplied wireless LAN PC card to the PC card slot. 3 Switch
  • Toshiba TDP-TW300U | Owners Manual - Page 38
    of an image after it has been lowered.) ■ Converting an image file This converts JPEG files using compression formats not supported by the projector, Windows® metafiles (wmf), and bitmapped files (bmp) into JPEG files. (1) In the Conversion Method field, select Converting image file. (Status
  • Toshiba TDP-TW300U | Owners Manual - Page 39
    • Only static images are supported by this process. Animation and audio are not supported. Presentation files created with Microsoft show from a thumbnail list" p.61 to display a list of thumbnails. (3) Follow the instructions in step 2 in "Playing a slide show from a thumbnail list" p.61 to find
  • Toshiba TDP-TW300U | Owners Manual - Page 40
    with the Wireless/Card and Top: USB input menus. Returns you to the top page. TOSHIBA Projector Site: The browser will display the home page at http:// multimedia.projector-toshiba.com/map.html, providing projector information. The home page address is subject to change without notice. (The
  • Toshiba TDP-TW300U | Owners Manual - Page 41
    depends on condition of use.) If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealership when the lamp has to be exchanged. Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger
  • Toshiba TDP-TW300U | Owners Manual - Page 42
    is no longer loose. (Be sure to replace the outer lamp cover.) 9 Reset the lamp timer. See the lamp's manual for instructions on resetting the lamp timer. Notes and Precautions • Press the button twice to display (a rough guide) the time of lamp use, the [Lamp time] item, in the Status display menu
  • Toshiba TDP-TW300U | Owners Manual - Page 43
    Others Trouble indications The indicator lights and a beep sound inform you of internal abnormalities. No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. (Off) (Red lit) (Red lit) Lamp went out during use, or won't come on ⇒ Lamp temperature is high so that it is
  • Toshiba TDP-TW300U | Owners Manual - Page 44
    there any obstructions between the computer and projector? • Do your computer and OS support the supplied software application? p.65 86 Connection terminal Others Specifications ■ List of general specifications Item Specification Consumption Power 400 W Weight 5.5 kg External Dimensions
  • Toshiba TDP-TW300U | Owners Manual - Page 45
    Specifications (Continued) ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution 720 x 400 640 x 480 800 x
  • Toshiba TDP-TW300U | Owners Manual - Page 46
    Specifications (Continued For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data are to be sent consecutively, wait for the response from the projector before sending the next command. ● Main Commands Item Power on
  • Toshiba TDP-TW300U | Owners Manual - Page 47
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW300