Toshiba Tecra M9 PTM91C-TG109C Users Manual Canada; English - Page 72
Start, Control Panel, System and Maintenance, System, Power and Power-Up Modes
View all Toshiba Tecra M9 PTM91C-TG109C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Hardware, Utilities and Options 12. Tuck the keyboard ribbon cable into the groove under the memory module cover. Screws Memory module cover Keyboard ribbon cable Figure 3-9 Seating the memory module cover 13. Insert the tabs on the front of the keyboard into the corresponding notches on the computer and place the keyboard down. When seating the keyboard, be sure to connect the circuit board if the keyboard ribbon cable was pulled out while you were removing the keyboard. 14. Replace the keyboard and secure it using the two screws. Be sure to use all two screws removed in step 7. Make sure no screw was dropped into the computer. Make sure no foreign matter can be found inside the computer. Screws Keyboard Tabs Figure 3-10 Replace the keyboard 15. Set the keyboard brace into its groove and hold down to secure the latches. 16. Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, for details. 17. Turn your computer over. 18. Turn the computer on and make sure the added memory is recognized - to confirmed it, Start -> Control Panel -> System and Maintenance > System icon. User's Manual 3-21