Toshiba W707 Owners Manual - Page 23

PLAYBACK Useful Functions in Tape Operation These functions will help your playback. S-VHS Quasi Playback (SQPB) • This VCR can also play back a tape which is recorded in S-VHS format. But the playback picture does not have the same quality and resolution as the original S-VHS playback picture. • This VCR cannot record in S-VHS format. * SQPB is an abbreviation for S-VHS Quasi Playback. PLAYBACK 1 2 3 4 5 6 7 8 9 0 100 PLAY/x2 REW FF STOP Counter Function You can view the clock, linear time counter or tape remaining REMAIN/ time in the VCR display or on the TV screen. COUNTER 1 COUNT RESET Each time you press REMAIN/COUNTER, the VCR display DISPLAY changes in sequence as follows: PLAY/x2 → Linear time counter (HMS) → Tape remaining time (REMAIN/RT) → Clock STOP ENTER PROG. The indication above will also appear on the TV screen by pressing DISPLAY. They are switchable with REMAIN/COUNTER. To reset the linear time counter to "0H00M00S" The counter is automatically reset to "0H00M00S" when a cassette is ejected. If you want to reset at another point, such as the beginning of a new recording, just press COUNT RESET. Notes • The linear time counter does not work on non-recorded portions on the tape. • When the tape is ejected or the VCR is turned off, the display changes to clock. • If the tape rewinds back over "0H00M00S", "-" appears in the VCR display. • The displayed time of the linear time counter is only an approximation. Tape Remaining Time To view the tape remaining time in the VCR display, select the tape length beforehand. 1 Turn on the VCR and load a cassette. 2 Press PROG to display the MENU screen. 3 Select "SET UP" using CURSOR RIGHT or CURSOR LEFT, and press ENTER. 4 Select the length of the tape. T120: for a T-120 tape or shorter T160: for a T-140 or T-160 tape T180: for a T-180 tape PROGRAM SET UP PRESET TAPE LEnGTH 120 160 180 SAP SET On OFF S I MULCAST On OFF ANT En nA AUTO MAnU LAnGUAGE XDS I nFO EOnGn FRA ESP OFF EnD: PROG (Continued) 23