Toshiba W707 Owners Manual - Page 27

RECORDING 5 Move to the next using CURSOR RIGHT, and set the recording date using CURSOR UP or CURSOR DOWN. The date changes as follows: → 8/25 → 8/26 9/24 → WKLYSU → ... MO~FR ← WKLYSA ← PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 SLP EnD: PROG [WKLYSU]...[WKLYSA]: You can record TV programs on the same channel on the day and time every week. [MO~FR]: You can record TV programs on the same channel on the day and time Monday through Friday. 6 Move to the next using CURSOR RIGHT, and set the hour and minutes of the recording start time. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM - : -- SLP EnD: PROG 7 Move to the next, and set the recording off time. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM 10 : 00PMSLP EnD: PROG 8 Move to the next, and select the tape speed (SP) using CURSOR UP or CURSOR DOWN. For the tape speed "AUTO (Auto Speed Select)", see below. To set another program, press CURSOR RIGHT, and select the next line pressing CURSOR DOWN. Repeat steps 4 to 8. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM 10 : 00PMSP EnD: PROG 9 Press PROG. Now programming is completed. 10 Press both TIMER simultaneously. • REC TIMER The power turns off and the VCR enters the timer standby mode. POWER TIMER Auto Speed Select If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the recording tape speed to "AUTO". Recording starts in the SP tape speed and the VCR automatically selects the tape speed to record the program to the end. If the tape length is not long enough, the tape speed automatically changes from SP to SLP. Notes • Make sure that the tape length is selected correctly according to the tape used on the SET UP screen (page 23). • When the SLP tape speed is selected and the tape length is not sufficient to record the program to the end, the program cannot be recorded to the end. • The picture will be distorted when playing the part where the recording tape speed is switched from SP to SLP with the Auto Speed Select feature. 27