Troy-Bilt Big Red Operation Manual - Page 10
Forward Hole, Short Link Bar, Clutch Pawl Spring, Clutch Roller, Adjustment Block, - tiller will not engage
View all Troy-Bilt Big Red manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Pull the Wheels/Tines/PTO Lever back to align the forward 8. To test Reverse, lift and hold the lever all the way up in most holes in the yoke plate with the holes in the lever the Reverse position, then let it go. The lever should plates. Also align the bushing that is inside the short link automatically return to the Neutral position. See Figure bar. Install the screw, star washer, and nut, then tighten 3-12. If not, do not use the tiller. See your local authorized securely. Securely tighten all other hardware. Also ensure dealer or call the TROYBILT Technical Service Department that the spring is properly seated at both ends. Completed for instructions. assembly should appear as illustrated in Figure 3-10. Clutch Pawl Spring Forward Hole Short Link Bar Figure 3-10 7. Test the operation of the Wheels/Tines/PTO Lever. Push the lever down until it engages in the Forward position. The clutch roller must rest beneath the adjustment block. Next, move the lever up to the Neutral position. See Figure 3-11. Clutch Roller Adjustment Block Figure 3-12 Clutch Roller Adjustment Block Figure 3-11 10 Section 3- Assembly & Set-Up