Uniden ATLANTIS 155 English Owners Manual - Page 17

Boos°ng Transmission Power

Page 17 highlights

NOTE Each time you change the UIC mode, Triple Watch, EMG CH16/CH9, WX mode, and WX Alert mode are canceled. The system does not remember these settings between modes. Memory channels are saved to their specific UIC mode. Transmitting The radio can transmit for up to 3 minutes. TX displays when transmitting. After 3 minutes of continuous transmission, transmission is canceled and an error tone sounds. The radio transmits at 1W; press BOOST to transmit at 3W. Boosting Transmission Power 1. Hold the radio approximately 2 inches in front of your mouth with the antenna at approximately 45º angle away from your head. 2. Press BOOST on the side of the radio to change the transmit power from Low (1W) to High (3W). Speak in a clear, normal, conversational voice. 3. When you have finished speaking, release PTT or BOOST to listen for a response. TX then disappears. 4. When the channel is clear, press and hold PTT or BOOST to transmit. TX displays again. NOTE When you press BOOST and the transmit power is low (LO - 1W), the radio transmits at maximum high power (HI - 3W) except for US channels 13, 17, 67, 75, 76, and 77, CAN channels 13, 15, 17, 20, 66A, 75, 76, and 77, and INT channels 15, 17, 75, and 76. Receiving Release PTT or BOOST to receive another party's transmissions to you. Uniden Atlantis 155 Owner's Manual E-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

E-17
Uniden Atlantis 155 Owner’s Manual
NOTE
Each time you change the UIC mode, Triple Watch, EMG
CH16/CH9, WX mode, and WX Alert mode are canceled.
The system does not remember these settings between
modes.
Memory channels are saved to their specific UIC mode.
Transmi²ng
The radio can transmit for up to 3 minutes.
TX
displays when
transmitting. After 3 minutes of continuous transmission,
transmission is canceled and an error tone sounds.
The radio transmits at 1W; press
BOOST
to transmit at 3W.
Boos°ng Transmission Power
1.
Hold the radio approximately 2 inches in front of your mouth
with the antenna at approximately 45º angle away from your
head.
2. Press
BOOST
on the side of the radio
to change the transmit
power from Low (1W)
to High (3W). Speak in a clear, normal,
conversational voice.
3.
When you have finished speaking, release
PTT
or
BOOST
to
listen for a response.
TX
then disappears.
4.
When the channel is clear, press and hold
PTT
or
BOOST
to
transmit.
TX
displays again.
NOTE
When you press
BOOST
and the transmit power is low
(LO - 1W), the radio transmits at maximum high power
(HI - 3W) except for US channels 13, 17, 67, 75, 76, and
77, CAN channels 13, 15, 17, 20, 66A, 75, 76, and 77,
and INT channels 15, 17, 75, and 76.
Receiving
Release
PTT
or
BOOST
to receive another party's transmissions
to you.