Uniden ATLANTIS 155 English Owners Manual - Page 20
Scan Mode Operation
View all Uniden ATLANTIS 155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SCAN MODE OPERATION You can save channels into memory and then use scan mode to monitor those channels from lowest to highest. If the radio detects a signal on a channel, it stays on that channel as long as the signal is received; when the signal stops, the radio continues scanning. When it detects a signal, the radio stays on the channel until you press the CH ▲ or CH ▼ button or the signal stops. Resume scan 08 10 11 12 13 14 15 17 The radio scans about 5 channels in 0.5 seconds. Using the radio in scan mode xx To activate scan mode, press SCAN MEM. xx You must have at least two channels in memory to start a scan. xx To save a channel into memory, select the channel, then press and hold the SCAN MEM key. The MEM icon displays whenever you tune to that channel. xx To remove a channel from memory, set the radio to that channel, then press and hold the SCAN MEM key. The MEM icon no longer displays. xx When the radio stays on a channel, press CH or CH to leave that channel and resume scanning. xx To end the scan, press the SCAN MEM key again; the radio remains on the last scanned channel. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while in scan mode (press and hold WX ALERT), the radio checks the most recentlyused weather channel every seven seconds, then continues E-20 Uniden Atlantis 155 Owner's Manual