Uniden ATLANTIS 275 English Owners Manual - Page 16

Normal mode with Triple Watch or Dual Watch If you activate Triple Watch while operating in normal mode, the radio checks channels 9 and 16 every two seconds and then returns to the current MRN or WX channel; with Dual Watch turned on, the radio only checks channel 16 before returning to the current MRN or WX channel. The radio will not check channels 9 or 16 while you are actively transmitting; it waits until your transmission is finished and then checks the channels. Monitoring Channel 25 16 09 16 09 Every few seconds, the radio checks channels 16 & 9. Triple Watch on 16 09 SCAN MODE OPERATION You can save channels into memory and then use scan mode to monitor those channels from lowest to highest. If the radio detects a signal on a channel, it stays on that channel as long as the signal is received; when the signal stops, the radio continues scanning. When it detects a signal, the radio stays on the channel until you press the ▲ or ▼ button or the signal stops. Resume scan 08 10 11 12 13 14 15 17 The radio scans about 5 channels in 0.5 seconds. E-10 Uniden Atlantis 275 Radio Owner's Manual