Uniden ATLANTIS 275 English Owners Manual - Page 20
Installing And Removing The Belt Clip, Using Your Radio, Changing The Volume
View all Uniden ATLANTIS 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Cautions: xx Use only the charger supplied with this radio. Using a different charger or battery can damage the radio and create a risk of fire or shock. xx The charger is not waterproof. If the charger falls into the water, unplug it before attempting to remove it from the water. After you remove the charger from the water, visit www.uniden.com for assistance. xx Wipe off dirt or shake water from your radio before placing in the charger if your radio gets dirty or wet. Important notes on charging the battery xx Charge the battery fully before using the radio. When the battery is completely charged, the CHARGE LED turns green. xx Don't use the charger when the ambient temperature is below 41° F (5° C) or above 104° F (40° C). xx If the radio is powered down, the battery can charge in about five hours. (If the radio is powered on, the battery takes longer to charge.) INSTALLING AND REMOVING THE BELT CLIP To install the belt clip: Slide the belt clip down over the latch until you hear it click. To remove the belt clip: 1. Lift the flat latch. 2. Slide the clip up until it comes free of the latch. USING YOUR RADIO CHANGING THE VOLUME To increase the speaker volume, press the VOL SQL key. The screen displays VOL and a volume level number. Use E-14 Uniden Atlantis 275 Radio Owner's Manual