Uniden BC246T English Owners Manual - Page 64

Setting the Channel Delay Time, Setting ID Scan/Search (Trunked Systems Only), program system

Page 64 highlights

Notes: • If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity). • The default setting is 2 seconds for each system. • For conventional systems, all unlocked channels will be scanned at least once regardless of this setting. • The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires. • Due to the control method for these system types, the scanner always scans LTR and EDACS SCAT systems for at least 1 second. Setting the Channel Delay Time Menu program system E Select the system E Edit Sys Option E Set DELAY Time E This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from 1-5 or Off, then press E. Notes: • The default setting is 2 seconds for each system. • This setting applies to all channels within the system. Setting ID Scan/Search (Trunked Systems Only) Menu program system E Select the system E Edit Sys Option E ID SCAN/SEARCH E This setting controls how the system will be scanned. Select your setting, then press E. Programming/Editing Optional Settings 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

64
Programming/Editing Optional Settings
Notes:
If you select 0, the scanner stays on the system for a
minimal time (only long enough to check current
system activity).
The default setting is 2 seconds for each system.
For conventional systems, all unlocked channels will
be scanned at least once regardless of this setting.
The scanner moves to the next system after the hold
time expires, any current transmission ends, and the
channel delay time expires.
Due to the control method for these system types, the
scanner always scans LTR and EDACS SCAT sys-
tems for at least 1 second.
Setting the Channel Delay Time
J
program system
J
E
4
Select the system
J
E
4
Edit Sys Option
J
E
4
Set DELAY Time
J
E
This setting controls how many seconds the scanner
waits after a transmission ends before resuming
scanning. Enter a value from
1
-
5
or
Off
, then press
E
.
Notes:
The default setting is 2 seconds for each system.
This setting applies to all channels within the system.
Setting ID Scan/Search
(Trunked Systems Only)
J
program system
J
E
4
Select the system
J
E
4
Edit Sys Option
J
E
4
ID SCAN/SEARCH
J
E
This setting controls how the system will be scanned.
Select your setting, then press
E
.
Menu
Menu