Uniden BT230A English Owners Manual - Page 14

If... The headset paired with my phone, but I can't hear anything through it. The headset keeps beeping, and I don't know why. I can hear the caller, but the audio is very weak or soft. Try... • Making sure the call connected and is still active. • Making sure the phone transferred the call to the headset. Press and hold MFB for two seconds to transfer the call. • Seeing if the battery is getting low. If the LED is blinking red, charge the battery. • Turning the speaker volume up. • Moving closer to your phone (if you aren't carrying it). • Keeping the battery fully charged; As the battery starts to run out, the speaker gets softer. Reset the Headset NOTE: Before resetting the headset, make sure the headset is not connected to any mobile phones (e. g. headset is in connectable mode). Press and hold MFB + DOWN for 4 seconds. The LED flashes 5 times and the headset beeps. Once the headset is reset, all the mobile phone links are deleted. General Information • You cannot use the headset while it is recharging. • Bluetooth wireless devices have a maximum range of 30 feet (10 m); the actual range varies depending on current conditions (obstacles, battery power, interference, etc.). 14