Uniden D1483 User Guide - Page 12

To... From the base From a handset hear the caller leaving a Listen to the caller message over the speaker. Press Message/mute. answer the call mute the call screen without answering* NA Press Play/stop. Press Talk/flash. Press End or return the handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. Programming a Security Code With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you're finished. ## Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number from any touch-tone phone, and wait until the system answers. xxIf you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don't. You can hang up during the third ring. xxIf the system is turned off, it answers after 10 rings and beeps sound. 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command; enter a 2-digit command from the chart. ## If you don't press any keys for 15 seconds, the system hangs up and return to standby. 01 Repeat message 02 Play message 03 Skip message 04 Delete message 05 Stop playback 06 Turn the system on 09 Turn the system off 10 Hear help prompts 12 - English