Uniden D1484 English Owner Manual - Page 12

-- You can press the number key shown next to each command instead of scrolling through the screens. -- If you do nothing for 30 seconds, the phone returns to standby. Getting Your Message When you have new messages (that you have not listened to yet), only the new messages will be played. To play old messages, completely play all new messages first, and then start message playback again. To... play new messages restart this message replay an earlier message skip a message delete this message play old messages stop playback From the base From a handset Press Play/stop. Press Message/mute. Wait at least 5 seconds after starting this message, press REV. select 1:Repeat. Within 2 seconds after starting a message, press REV. select 1:Repeat. Press FWD. Select 3:Skip. Press Delete. Select 4:Delete. After the system plays all new messages, press Play/stop again. select 2:Play. Press Play/stop. Select 5:Stop. Deleting All Messages With the phone in standby, press Delete; press Delete again to confirm. Screening Your Calls While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby. To... From the base From a handset hear the caller leaving a Listen to the caller message over the speaker. Press Message/mute. answer the call mute the call screen without answering* NA Press Play/stop. Press Talk/flash. Press End or return the handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. 12 - English