Uniden D1484 English Owner Manual - Page 8

You can adjust the ringer volume when the phone is in standby; to turn off the ringer, turn the ringer volume all the way down. Finding the Handset With the phone in standby, press Find on the base. All handsets beep for 1 minute. To cancel, press Find again or press any handset key. Using the Phonebook, Caller ID, and Redial Lists xxThe phone can store up to 70 entries in its phonebook. xxIf you subscribe to Caller ID (CID) service, the phone stores the information for the last 30 received calls to the CID list. Contact your telephone provider for more information. xxEach handset remembers the last 5 numbers you dialed on it. xxOnly one handset can access one of the lists at a time. To... Press... open the list Phonebook/left, Caller ID/right, or Redial/pause. scroll through the list Up or Down. dial the current entry Talk/flash or Speaker. add 1 at the front of CID number store the current CID or redial entry to the phonebook * before dialing for a toll call. Menu/SELECT, then select Store Into Pb. Edit the name and number as needed. edit the current phonebook entry Menu/select, then select Edit. delete the current entry Menu/select, then select Delete (or Delete Entry). To confirm, select Yes. close the list Phonebook/left. ## When it's in standby, the handset shows how many calls came in since the last time you checked the CID list. Adding Phonebook Entries With the phone in standby, open the phonebook. Press Menu/select and then select Create New. Proceed to enter a name and number. xxEnter the phone number (up to 20 digits) exactly as you would dial it. xx If you need to enter a pause between the numbers, press Redial/pause; you'll see a P in the display. (The dialing will pause for about 2 seconds per a digit.) xx To edit the number, press Intercom/clear to back up the cursor and delete numbers. Re-enter the correct numbers. Deleting All the Entries With the phone in standby, open the list (phonebook, CID, or redial). Press Menu/ select and then select Delete All. To confirm, select Yes. 8 - English