Uniden DCT5260 English Owners Manual - Page 7

QUICK REFERENCE GUIDE Step 1 Charging the Batteries INSTALL THE AA BATTERIES Remove the cover. Install the batteries, observing the correct + - polarity. Replace the cover. PLUG INTO AC POWER Plug the AC adapter cord into the base unit and then to a 120V AC outlet. Step 2 Connecting CONNECT TO A PHONE LINE When the handset batteries are fully charged, plug the telephone cord into the base unit and then into a telephone wall jack. Step 3 Using the Phone SELECT CALLER ID OPTIONS SUN 12:00A Handset #1 New: 5 MENU CID RDL PB Your phone is set for tone dialing. If your local network requires pulse dialing, please see "Setting the Dial Mode" on page 24. Press the MENU soft key in the standby mode. Press volume/ L or M to select "Global Setup", then the OK soft key. Press volume/ L or M to select "CIDCW", then the OK soft key. Press volume/ L or M to select "CW On/CWDX On", "CW On/CWDX Off", or "CW Off/CWDX Off", then the OK soft key. CHOOSE THE LANGUAGE Press the MENU soft key in the standby mode. Press volume/ L or M to select "Handset Setup", then the OK soft key. Press volume/ L or M to select "Language", then the OK soft key. Press volume/ L or M to choose a Language, then the OK soft key. Place the handset in the base. Note: You must charge the batteries continuously for 17-20 hours before using the phone. QUICK REFERENCE GUIDE [ 5 ]