Uniden DCT7585-3 English Owners Manual - Page 63

Symptom Severe noise interference. The Caller ID does not display. The handset doesn't ring or receive a page. You cannot register the handset at the base. The handset doesn't communicate with other handsets. An extra handset can't join the conversation. Room Monitor does not work. Suggestion • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. • The call was placed through a switchboard. • Call your telephone provider to verify your Caller ID service is current. There may be a problem with your Caller ID service. • Make sure that you are not too far from the base. • Charge the battery in the handset for 15 to 20 hours by placing the handset on the base or charging cradle. • Change the Digital Security Code (see Changing the Digital Security Code on page 60). • Charge the battery pack in the handset for 15 to 20 hours. • Change the Digital Security Code (see Changing the Digital Security Code on page 60). • Change the Digital Security Code (see Changing the Digital Security Code on page 60). • Make sure that you have registered all handsets (see Registering Accessory Handsets on page 20). • Make sure there are not two handsets already using the conference feature. • Make sure that another handset is not in privacy mode. • Make sure to place the handset(s) within the range of the base. 62