Uniden DECT2088 English Owners Manual - Page 17

Wall plate

Get Uniden DECT2088 - DECT 2088 Cordless Phone Base Station PDF manuals and user guides
UPC - 050633271223
View all Uniden DECT2088 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Place the mounting slots over the pins on the wall plate. Wall plate Installing the Phone On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees and flip the retainer from front to back. Slide it back into the slot. The retainer holds the corded handset in place. (To AC outlet) Slide the base down to lock it into place. Notes: Mounting the phone directly on the wall • Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material. • Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 /15 16 inches apart. • Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone. • Align the mounting slots over the screws and slide the base down into place as shown above. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
±6
Installing the Phone
Place the mounting slots over the
pins on the wall plate.
Slide the base
down to lock it
into place.
Wall plate
On the base unit, pull the handset
retainer out of the slot.
Rotate it clockwise 180 degrees and
flip the retainer from front to back.
Slide it back into the slot.
The retainer holds the corded
handset in place.
(To AC outlet)
Notes: Mounting the phone directly on the wall
Be sure the wall is capable of supporting the weight
of the phone, and use the proper type of anchoring
device for the wall material.
Insert two #±0 screws (minimum length of ±
3
/
8
inches, not supplied) into the wall, 3
±5
/
±6
inches
apart.
Leave the screw heads
±
/
8
inch away from the wall to
allow room for mounting the phone.
Align the mounting slots over the screws and slide
the base down into place as shown above.
•
•
•
•