Uniden DECT2088 English Owners Manual - Page 57

Troubleshooting When you have this problem... The answering system does not record any messages. The answering system doesn't say what time messages were recorded. Try... • The memory may be full. Delete some or all of the saved messages (see page 49). • Checking to see that the message record time is not set to announce only (see page 46). • Checking to see if you have set the time (see page 46). Messages are incomplete. • The incoming messages may be too long. Ask callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages (see page 49). I can't hear base or handset speaker during call screening or message playback. I can't access answering system from a remote phone. • Adjusting the speaker volume on the base or handset (see page 38). • Checking to see if the call screen feature is set to on (see page 47). • Checking to see if you are using the correct PIN number (see page 50). • Checking to see if the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, try using a different touch-tone phone. Resetting the Handset You may need to reset your handset in the following instances: • You lose a handset and purchase a new one. • You get the message Registration Failed when you try to register the handset. • You are unable to register any handsets to the base. • When you register new handsets to the base, the handset IDs do not match. (For example, the handset registers as "Handset #4" but you only have two handsets.) • When you are instructed to by one of Uniden's call center representatives. 56