Uniden DECT4066 English Owners Manual - Page 41
Installing a line, lter or DSL
UPC - 050633272800
View all Uniden DECT4066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Here are some hints for when the static is... on 1 handset or in 1 location: on all handsets or in all locations: - Check nearby for one of the common - Check near the base for the interference sources. source of interference. - Try moving the handset away from a - Try moving the base away from a suspected source, or try moving the suspected source, or turn off the suspected source so it's not between source if possible. the handset and the base. - If the base has an adjustable - Try moving closer to the base. There antenna, try raising the antenna is always more noise at the edges so it stands straight up. of the base's range. If the handset - If you have any service that uses displays an Out of Range message, the phone line, you might need a you need to move closer to the base. filter (see below). Installing a line filter or DSL filter Sometimes, broadband Internet Telephone wall jack services that use the telephone line can interfere with phones. One of Telephone cord these services−DSL−often causes static on telephones. A DSL filter or DSL filter telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store. Plug the DSL filter into the telephone wall jack and plug your phone's base into the filter. Make a test call to make sure the noise is gone. 39