Uniden DECT4066 English Owners Manual - Page 43
Handling Liquid Damage
UPC - 050633272800
View all Uniden DECT4066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
In about 30 seconds, the handset display should say Registration Complete. Press TALK/FLASH and make sure you get a dial tone. If... Try... - you don't hear a dial tone Making sure the handset is fully - the display says Registration Failed charged, then start over at step 1. To register a handset to a different base, see the section "Expanding Your Phone" in the user's guide for the other base. Handling Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow these steps: Handset Base 1. Remove the battery cover and disconnect the 1. Disconnect the AC battery. adapter to cut off the 2. Let dry for at least 3 days with the battery power. disconnected and the cover off for ventilation. 2. Disconnect the 3. After the handset dries, reconnect the battery telephone cord. pack and replace the cover. Recharge the 3. Let dry for at least 3 days battery fully (16-20 hours) before using. before reconnecting. IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption. CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. 41