Uniden SC150Y English Owners Manual - Page 15
Deleting a Stored Frequency, B. Programming With SEARCH, That channel will be skipped during scanning.
View all Uniden SC150Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
E 7. Press to store the entry. The frequency on the display will blink twice to confirm the programming. 8. If that frequency is already stored in another channel, you will hear a "beep", and the other channel number will appear on the display. If you E want to store the frequency in the selected channel (18) as well, press again. The frequency will . blink twice to confirm the programming. Or, you can press twice and enter another frequency for the currently selected channel. Note: Any frequency already stored in any channel will automatically be replaced by the new one. 9. If you try to enter a frequency that is outside one of the 12 Bands, you will hear a "beep", and the word "Error" appears on the display. . Press twice and re-enter the correct frequency. 10. To program another channel, repeat the above procedures. Deleting a Stored Frequency To delete a frequency from a channel: 1. Display the channel and frequency that is to be deleted. 0 2. Press on the numeric keypad. E 3. Press . The current channel is erased, and the display shows 000.000. Note: That channel will be skipped during scanning. B. Programming With SEARCH The Search feature enables you to rapidly search for active frequencies within the specified band limits. When an interesting frequency is found, you can store it into a channel using the procedure below. For more information about SEARCH Mode, see the later section titled "Searching". N 1. Press to enter the SEARCH Mode. 15